MINOLTA DiMAGE 2330 Guida Utente
The flash fires.
The flash is being charged. The shutter-release button is not
released.
released.
The shutter speed becomes slow. Taking a picture in this mode
may cause an image blurred.
The flash function is cancelled when the flash mode is set to
“FLASH CANCEL”, when the drive mode is set to the burst image
capture or, when the focus mode is set to the close-up mode.
may cause an image blurred.
The flash function is cancelled when the flash mode is set to
“FLASH CANCEL”, when the drive mode is set to the burst image
capture or, when the focus mode is set to the close-up mode.
Lights
Blinks quickly when the shutter-
release button is pressed all the
way down (about 8 times in a
second).
release button is pressed all the
way down (about 8 times in a
second).
Blinks slowly (when the flash
function is cancelled).
(about 2 times in a second).
function is cancelled).
(about 2 times in a second).
FLASH
+/-
0
FOCUS
AF
DRIVE MODE
QUALITY
QUALITY
STD.
IMAGE SIZE
FULL
WB
AUTO
SHARPNESS
NORMAL
FLASH - CONT’D
- 43 -
Press the
key.
Press the MENU button.
• The selected flash mode is displayed with
the icon shown on the previous page on
the upper right side of the LCD monitor
(see page 35). However, when
“AUTOFLASH” is selected, no icon
appears and when “AUTOFLASH WITH
RED-EYE REDUCTION” is selected, only
the upper right side of the LCD monitor
(see page 35). However, when
“AUTOFLASH” is selected, no icon
appears and when “AUTOFLASH WITH
RED-EYE REDUCTION” is selected, only
appears.
• The flash mode returns to “AUTOFLASH
WITH RED-EYE REDUCTION” when the
camera is turned off and on again.
camera is turned off and on again.
Flash Lamp
The flash lamp (orange) shows the flash status.
D2330Z_Body_Eng.qxd.4 00.10.11 5:22 PM ページ 43