Exegin Technologies Limited Q52 Manuale Utente
62
Q52 Installation and Configuration Guide © Exegin Technologies Limited, 2007
8. Reference Information
Complete Command Reference
Complete Command Reference
set sysinfo label newname
Set a descriptive name defined by newname
for the Q52 for identification purposes. This
is not used in the operation of the Zigbee
bridge device in any way.
for the Q52 for identification purposes. This
is not used in the operation of the Zigbee
bridge device in any way.
For example:
set sysinfo name
salesprinter
set sysinfo label newname
Set a descriptive name defined by newname
for the Q52 for identification purposes. This
is not used in the operation of the Zigbee
bridge device in any way.
for the Q52 for identification purposes. This
is not used in the operation of the Zigbee
bridge device in any way.
For example:
set sysinfo name
salesprinter
set sysinfo from default
Set all sysinfo settings back to factory
defaults.
defaults.
set user passwd username
password
Assign a password to a defined user on the
Q52. This password must be less than
eleven characters. The username must be
either root or guest. If the new password is
not entered, the user’s old password will be
cleared.
Q52. This password must be less than
eleven characters. The username must be
either root or guest. If the new password is
not entered, the user’s old password will be
cleared.
For example:
set user passwd root mplex1
If you forget the root password, you can set
the dipswitchs to restore settings to factory
defaults. See
the dipswitchs to restore settings to factory
defaults. See
set user from default
Set all user settings back to factory defaults.
set user from stored
Set all current user settings to the stored
values in Flash.
values in Flash.
Table 5—Set Command Options
Command Syntax
Description