Exegin Technologies Limited Q53R6 Manuale Utente
30
Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2013
6. Configuring the Q53 Gateway
Required Gateway Settings
Required Gateway Settings
6
C
ONFIGURING
THE
Q53 G
ATEWAY
This chapter describes how to configure the required and optional Gateway settings for
the Q53 on your network. The following steps are covered:
the Q53 on your network. The following steps are covered:
•
Once the TCP/IP network port is configured on the Q53, additional configuration is
required to connect the Q53 to the local ZigBee Personal Area Network (PAN). Please
refer to
required to connect the Q53 to the local ZigBee Personal Area Network (PAN). Please
refer to
on page 33 for details on ZigBee
PAN configuration.
Required Gateway Settings
Figure 7—Q53 Gateway Settings
The Gateway Settings page allows for the configuration of the SOAP and REST
interfaces of the gateway.
The SOAP interface configuration admits only one parameter, the TCP/IP port number
on which it will receive SOAP request. The default is 8080. This is the port number to
which a host application will direct its SOAP requests.