TTE Technology L42FHDE30 Manuale Utente

19

Connect an off-air antenna to the ANT/CABLE/SAT IN to view free local digital channels. You may need to 

purchase an antenna. 

Visit www.antennaweb.org for assistance in deciding what type of antenna to use to receive the local digital 

channels available to you. By entering your location, this mapping program tells you which local analog and 

digital stations are available using a certain antenna.

Besides using an off-air antenna as mentioned above, you can also use a set-top box to receive

digital video. Contact your cable company or satellite provider to purchase digital programming

and have them connect the box to ensure you are viewing channels the best way.

Press the INFO button to display the Channel Banner. Look at the bottom right corner of the screen. The dot (•) 

is displayed for a digital channel.  If there is no dot, it is an analog channel.

Most digital video is sent in a 16/9 format which fills your screen, but is sometimes sent in 4/3 which does not 

fill your screen. It depends on how the station or device connected to your TV is formatting the video. If there 

are bars on the screen, press the ZOOM -/+ button to try a different format that may eliminate the bars. Some 

bars can’t be removed because of the way the format is sent by the broadcaster. The format changes as you 

press the ZOOM -/+ button and the format type is displayed at the bottom of the screen. 

Some channels enabled by the cable company don’t carry programming, such as video ondemand.  When 

channels are unavailable, your TV screen is blank or appears like snow. You probably want to remove these 

channels from your Channel List. Remove these in the Channel Skip Menu. 

If you have both analog and digital channels, the TV is looking for all available channels in the Channel List. If 

you do have digital channels, the TV is also searching for scrambled channels, non-scrambled channels, and 

each sub-channel of that digital channel.