System Planning Corporation GTLITEV3 Manuale Utente
GlobalTrak ™
GT Lite Operation and Maintenance Manual
4.2 Create HyperTerminal Connection
The next step to connecting a GT Lite to a PC is to create and save a HyperTerminal
connection. HyperTerminal is free software that allows a PC to monitor serial data, such as
connection. HyperTerminal is free software that allows a PC to monitor serial data, such as
the diagnostic data coming from GT Lite. This step only needs to be completed once per
computer.
computer.
15. Power on GT Lite.
16. Open a new HyperTerminal connection.
17. Name the connection ‘GT_Lite_Connection’ and click OK.
18. Select the COM port number used in step 10 above.
19. Set the COM port properties using the settings shown below and press ‘OK’.
Figure XXXXXX
20. Save the connection to a known location such as the desktop.
21. Close HyperTerminal.
22. Power off GT Lite.
Prepared: R. Straz
Date: July 25, 2007
Page 54 of
139