System Planning Corporation GTLITEV3 Manuale Utente
GlobalTrak ™
GT Lite Operation and Maintenance Manual
Set Powered Transmit Interval
Set a new transmit interval used while the device is powered.
Command:
AT+PARAM=”POWTRANS”,”<pow>”
<pow>: Transmit interval in seconds
Expected Response:
OK
View In Motion Transmit Interval
View the current transmit interval used while the device is in motion and the motion sensor is
turned on.
turned on.
Command:
AT+PARAM=”STDTRANS”
Expected Response:
APPLICATION: (SYSSTAT_ParamCommandHandler) Enter.
+SYSSTAT: STDTRANS=<std>
OK
OK
<std>: Transmit interval in seconds
Set In Motion Transmit Interval
Set a new transmit interval used while the device is in motion and the motion sensor is turned
on.
on.
Command:
AT+PARAM=”STDTRANS”,”<std>”
<std>: Transmit interval in seconds
Expected Response:
OK
Network Commands
View Server Port Number
View the current port number used for GPRS communications.
Command:
AT+PARAM=”SERVPORT”
Expected Response:
Prepared: R. Straz
Date: July 25, 2007
Page 70 of
139