Essence Security International ltd. ES6502HCP Manuale Utente
PERS
Temp
12
2.10. Securing the Power Adapter Cube
WARNING!
Power switch must be turned OFF prior to the installation of the
Backup Battery and the Power Adapter
Figure 8 – Securing the Power Adapter Cube
Note
:
The Bracket must be installed to maintain UL Home Healthcare (UL 1637)
Listing. The Bracket may not be used for ULC Canadian Residential Fire Alarm (UL
S545) Listing
S545) Listing
Turn the Power Switch ON, return the bottom cover back to place (there is an option to
secure it with a screw) and position the Control Panel in its final location.
secure it with a screw) and position the Control Panel in its final location.
Once the power is switched ON, the Control Panel goes into standby mode as indicated by
the Power Indicator turning green and the Communication Indicator turning red.
the Power Indicator turning green and the Communication Indicator turning red.
If the Control Panel was sent pre-configured, the ring around the EMERGENCY button
turns blue as well.
turns blue as well.
2.11. Telephone Connections
Note
:
This chapter is only applicable for the PSTN model of the Control Panel.
Power Adapter
Secure the bracket with a screw
for decorative style outlets
Secure the bracket
with a screw for