Essence Security International ltd. ES6502HCP Manuale Utente
PERS
Temp
13
Two standard phone sockets (RJ-11) are provided on the rear panel of the PSTN model:
Figure 9 – The Telephone Sockets
Connect a telephone set to the socket marked PHONE
Connect a telephone cable between the LINE socket and your home telephone outlet
Once the telephone cable is connected to a functional telephone outlet, the
Communication Indicator color should switch from red to green.
Communication Indicator color should switch from red to green.
Note
:
In the Cellular model, these PSTN telephone sockets are covered by a
plastic hood.
2.12. Adding a Peripheral Device
Peripherals may be added to the system by activating the Pairing process, for each
peripheral, as follows:
peripheral, as follows:
Press the Pairing Button on the right edge of the front of the Control Panel for five
seconds. The Control Panel beeps and the ring (around the Emergency Button) lights in
blue with circular movement effect.
seconds. The Control Panel beeps and the ring (around the Emergency Button) lights in
blue with circular movement effect.
Hold the peripheral device and move about 50cm (20in) from the Control Panel. Power
up the device by inserting the batteries. If it is a portable device press the button to
power the device.
up the device by inserting the batteries. If it is a portable device press the button to
power the device.
If the pairing process is successful, the ring around the EMERGENCY button blinks blue
three times and the Control Panel beeps.
three times and the Control Panel beeps.
If the pairing process is not successful, the Control Panel beeps and the ring around
the EMERGENCY button lights red for two seconds.
the EMERGENCY button lights red for two seconds.