Essence Security International ltd. ES7502HC Manuale Utente
Operating the CP
Care@Home™ Control Panel Next Generation User Guide
13
3. Operating the CP
The CP is the core of Care@Home™, communicating with the various peripherals to monitor a
resident's activity, triggering emergency and safety alarms, acting as a speakerphone, and enabling
emergency conversations and remote call-in. In addition, the LEDs on the CP light up to display helpful
information.
resident's activity, triggering emergency and safety alarms, acting as a speakerphone, and enabling
emergency conversations and remote call-in. In addition, the LEDs on the CP light up to display helpful
information.
3.1. Monitoring a Resident – PRO and Family
The PRO and Family solutions allow the monitoring of a resident's activities with a variety of detailed
reports based on an analysis of the information collected by the peripherals. For information, refer to
ESUG05050 Care@Home Caregiver User Guide.
reports based on an analysis of the information collected by the peripherals. For information, refer to
ESUG05050 Care@Home Caregiver User Guide.
3.2. Monitoring a Resident - PERS
The PERS solution allows the monitoring of residents with the following features:
Activity Timer
Inactivity Timer
3.2.1 Activity Timer
The activity timer feature is configured with the CMS application, creating time slots during which
resident activity is checked by asking the resident to press the RESET button.
resident activity is checked by asking the resident to press the RESET button.
When the activity timer is enabled, the Activity LED is a steady blue
Fifteen minutes before the end of the session, the CP reminds the resident to press the RESET
button, and the Activity LED is a blinking blue
button, and the Activity LED is a blinking blue
If no activity is confirmed during the session, the CP sounds an announcement that the activity timer
has expired and an activity event is reported to the monitoring station.
has expired and an activity event is reported to the monitoring station.
3.2.2 Inactivity Timer
The inactivity timer feature is configured with the CMS application, creating time slots during which
resident activity is checked using the sensors on the premises. The CP provides no visual or audible
indications to the resident of an inactivity timer operation.
resident activity is checked using the sensors on the premises. The CP provides no visual or audible
indications to the resident of an inactivity timer operation.
The CP communicates with the monitoring station when no activity is detected.