Essence Security International ltd. ES7502HC Manuale Utente
Operating the CP
Care@Home™ Control Panel Next Generation User Guide
15
NOTE:
For compliance with the UL 985 and ULC-S545 standards, the ES700SK2
smoke detector must be part of Care@Home
™
.
3.5. Speakerphone
The CP can be configured to function as a speakerphone only for incoming calls. The speakerphone
does not function if the CP is running on a backup battery. The speakerphone feature can be disabled
by the monitoring station.
does not function if the CP is running on a backup battery. The speakerphone feature can be disabled
by the monitoring station.
When the CP rings, the resident can:
Press the EMERGENCY button to initiate a full-duplex conversation
End the call by pressing the EMERGENCY button again
NOTE: T
he Care@Home™ Voice Panic Detector (VPD) has a voice extender
capability which also allows the call center of the monitoring station or caregiver
to communicate with the resident. Refer to ESUGSC018 Care@Home VPD User
Guide.
to communicate with the resident. Refer to ESUGSC018 Care@Home VPD User
Guide.
3.6. Emergency Conversation Flow with the CP
The CP supports the following types of conversation flow:
Half-Duplex: only one party can speak at a time. In this mode, DTMF control is supported.
Refer to 3.6.1 Half-Duplex Conversation Flow on page 16.
Refer to 3.6.1 Half-Duplex Conversation Flow on page 16.
Full-Duplex: both parties can hear and speak at the same time. The call center operator can
use telephone keypad numbers 1 or 3 (or as otherwise configured) to switch to half-duplex.
use telephone keypad numbers 1 or 3 (or as otherwise configured) to switch to half-duplex.
NOTE:
To configure the keypad assignments, or the Conversation Mode
parameter, refer to the Care@Home™ CMS documentation for the version of
the Care@Home™ system installed on the resident’s premises.
the Care@Home™ system installed on the resident’s premises.