IDEMIA Identity & Security France MPHAC001A Manuale Utente
Section 5 : User Interface
2015_2000007248-V1 - Draft
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior written authorization of Morpho
48
June 2015
For further information, please see the "Authentication mode" section in the
MorphoAccess® SIGMA Lite Series Administration Guide.
MorphoAccess® SIGMA Lite Series Administration Guide.
Multi-factor mode
In this mode, the "identification" and "authentication" modes are available
simultaneously; the user decides which control method will be used:
simultaneously; the user decides which control method will be used:
by placing his finger on the sensor, thereby triggering the identification process,
by placing his contactless card on the reader, thereby triggering the authentication
process,
This is the default mode for terminals fitted with a contactless smartcard reader.
For further information, please see the "Multi-factors method" section in the
MorphoAccess® SIGMA Lite Series Administration Guide.
MorphoAccess® SIGMA Lite Series Administration Guide.
Proxy mode
The Proxy mode is an operating mode where the access control main application is
located in a distant system. This is not a standalone mode like Identification and
Authentication modes.
located in a distant system. This is not a standalone mode like Identification and
Authentication modes.
It means that the terminal becomes a slave of the host system application. The access
control application is running on the host system and uses MorphoAccess® SIGMA
Lite Series terminal high level functions:
control application is running on the host system and uses MorphoAccess® SIGMA
Lite Series terminal high level functions:
•
Identification function
•
Authentication function
•
Read data on a contactless card
•
Access control result signal command
The MorphoAccess® SIGMA Lite Series terminal is driven through an Ethernet (or Wi-
Fi™) link using TCP, SSL or TLS protocol.
Fi™) link using TCP, SSL or TLS protocol.
The MorphoAccess® SIGMA Lite Series terminal acts as a server: it is either waiting for
a command or executing a command.
a command or executing a command.
The commands allowed by the MorphoAccess® SIGMA Lite Series terminal are
described in the MorphoAccess® SIGMA Lite Series Host System Interface
Specification document.
described in the MorphoAccess® SIGMA Lite Series Host System Interface
Specification document.
For further details about SSL or TLS on the MorphoAccess® SIGMA Lite Series
terminal, please refer to the MorphoAccess® SIGMA Lite Series Administration Guide.
terminal, please refer to the MorphoAccess® SIGMA Lite Series Administration Guide.
External database mode (also called polling mode)
The reference biometric templates of the users are stored in external database,
instead of terminal local database or user’s RF card.
instead of terminal local database or user’s RF card.
When authentication is initiated on the terminal, the terminal will poll the user ID to
external controller. On polling out the ID, the corresponding template (if exists) is
fetched from the external database and is authenticated against user’s biometric on
external controller. On polling out the ID, the corresponding template (if exists) is
fetched from the external database and is authenticated against user’s biometric on