Insulet Corporation 017 Manuale Utente
10
2
Turn on the PDM
1. Open the battery compartment on the back of the PDM
by pushing the compartment latch and lifting upward
(Figure 2-1). No special tools are necessary.
(Figure 2-1). No special tools are necessary.
2. Insert two (2) new AAA alkaline batteries into the compart-
ment.
3. Replace the battery door.
4. Turn the PDM face up. The PDM has begun to power on auto-
matically.
■
The Setup Wizard
The first time you turn on the Personal Diabetes Manager, the
Setup Wizard comes on automatically. Although setup is easy
with the Wizard, if you are a first-time user, your healthcare pro-
vider must guide you through the process. Setup takes only a
few minutes and is easy to do:
Setup Wizard comes on automatically. Although setup is easy
with the Wizard, if you are a first-time user, your healthcare pro-
vider must guide you through the process. Setup takes only a
few minutes and is easy to do:
•
Use the Up/Down Controller buttons to increase or
decrease a number, or to move up or down a list.
decrease a number, or to move up or down a list.
•
Press the Soft Key labeled Next, Select, Done, or Save to con-
tinue to the next screen.
tinue to the next screen.
•
Press Back to return to the previous screen.
The diagram inside the compartment shows you which
direction to insert the batteries (Figure 2-2).
direction to insert the batteries (Figure 2-2).
Figure 2-1
Figure 2-2
Hard
Reset
Do not use any other type of batteries than AAA
alkaline batteries to power the PDM. Never use old
or used batteries; the PDM may not work properly.
alkaline batteries to power the PDM. Never use old
or used batteries; the PDM may not work properly.
Initial settings are “---” [blank] for target blood glucose
value, insulin-to-carbohydrate ratio, correction factor,
and duration of insulin action.
value, insulin-to-carbohydrate ratio, correction factor,
and duration of insulin action.