Insulet Corporation 019 Manuale Utente

2. Insert a test strip into the test strip port with the gold 

side of the test strip and silver prongs facing you. (Figure 7-3) until it stops. This turns on the PDM on the screen. Refer 
to page 57 to check Pod status and to Confirm ID.

Always verify that you are using OneTouch® 

Verio™ test strips with your PDM (Figure 7-4).

From some PDM screens, you cannot access the One-

Touch® Verio™ blood glucose meter. For example, you 

cannot use the meter while you are activating a Pod 
or when an alert, alarm or communication error 
screen is displayed. In these cases, if you insert a test 
strip, the PDM beeps to alert you.