EnOcean GmbH PTM210C Manuale Utente

USER MANUAL V0.9 

EnOcean GmbH 
Kolpingring 18a 
82041 Oberhaching 
Germany 

Phone +49.89.67 34 689-0 
Fax +49.89.67 

34 

689-50 

info@enocean.com 
www.enocean.com 

Subject to modifications 
PTM 210 / PTM 210C User Manual V0.9 
July 7, 2010 9:36 AM 
Page 14/18 

 

PTM 210 / PTM 210C 

 

 

 

 
 

 

For CAD system development support, 3D construction data is available from EnOcean (IGS 

data). Using this data, the mechanical interface is fixed, and the shape and surface of the 

rocker(s) can be changed according to requirements. Recommendation for suitable rocker 

material is polycarbonate (buckling resistant and wear-proof material). It is recommended 

to apply teflon varnish in the areas of actuation. 

 

 

Please note that the rockers should be of nonmetal for best transmission range! 

Please also avoid plastic materials with conducting ingredients like graphite! 

 

 

For mounting the PTM 210 device into an application specific case, the package outline 

drawings of the device are roughly dimensioned in chapter 1.4. If more detailed dimension-

ing data device case is necessary, 3D construction data is available from EnOcean (IGS 

data). 

 

 

Mounting the module back side on metal surfaces directly or mounting the module 

into metal frames can lead to up to typical 30% loss of transmission range within 

a building.