EnOcean GmbH PTM210C Manuale Utente

USER MANUAL V0.9 

EnOcean GmbH 
Kolpingring 18a 
82041 Oberhaching 
Germany 

Phone +49.89.67 34 689-0 
Fax +49.89.67 

34 

689-50 

info@enocean.com 
www.enocean.com 

Subject to modifications 
PTM 210 / PTM 210C User Manual V0.9 
July 7, 2010 9:36 AM 
Page 16/18 

 

PTM 210 / PTM 210C 

The devices bear the EC conformity marking CE and conform to the R&TTE EU-directive on 

radio equipment. The assembly conforms to the European and national requirements of 

electromagnetic compatibility. The conformity has been proven and the corresponding 

documentation has been deposited at EnOcean. The PTM devices can be operated without 

notification and free of charge in the area of the European Union, and in Switzerland. The 

following provisos apply: 

„ 

EnOcean RF devices must not be modified or used outside their specification limits. 

„ 

EnOcean RF devices may only be used to transfer digital or digitized data. Analog speech 

and/or music are not permitted. 

„ 

The final product incorporating EnOcean RF devices must itself meet the essential re-

quirement of the R&TTE Directive and a CE marking must be affixed on the final product 

and on the sales packaging each. Operating instructions containing a Declaration of Con-

formity has to be attached. 

If transmitters are used according to the regulations of the 868.3 MHz band, a so-called 

“Duty Cycle” of 1% per hour for each transmitter must not be exceeded. Permanent trans-

mitters such as radio earphones are not allowed. For conventional applications, it must be 

ensured that the PTM 210 radio device is not operated more than 6000 times within one 

hour (one operation: energy bow is pressed and released). Within this calculation, the ex-

traordinary short telegram length is considered including three subtelegrams. Also a toler-

ance of 5% in the telegram length is included. 

 

 

This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. If 

this device is operated in compliance with the following requirements it can be operated 

without notification and free of charge in the area of the United States of America and in 

Canada. Operation is subject to the following two conditions: 

 

(1) 

this device may not cause harmful interference, and  

(2) 

this device must accept any interference received, including interference that 

may cause undesired operation. 

 

 

 

 

 

 

 

 

 

Trade Name: PTM 210C 

Model No: PTM 210C 

This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. 

Operation is subject to the following two conditions. (1) this device may not cause harmful 

interference, and (2) this device must accept any interference received, including interfer-

ence that may cause undesired operation. 

 

FCC ID: SZV-PTM210C

 

IC: 5713A-PTM210C