TP-Link Technologies Co. Ltd. C20I Manuale Utente

 

- 18 - 

 

¾

 

Band - This field displayed the operating frequency being configured. 

¾

 

Mode - This field determines the wireless mode which the router works on. 

z

  11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. 

z

  11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless 

clients. 

¾

 

Channel Width - Select any channel width from the drop-down list. The default setting 

is “Auto”, which can adjust the channel width for your clients automatically. 

¾

 

Channel - This field determines which operating frequency will be used. It is not 

necessary to change the wireless channel unless you notice interference problems with 

another nearby access point. If you select “Auto”, then the AP will select the best 

channel automatically. 

7.  Configure the basic parameters for 5GHz wireless network in the following screen as shown 

in Figure 3-14, and then click Next. 

 

Figure 3-14 Quick Setup – Wireless 5GHz 

¾

 

Wireless Network Name - Also called the  SSID (Service Set Identification). Enter a 

value of up to 32 characters. The same name must be assigned to all wireless devices