TP-Link Technologies Co. Ltd. C20I Manuale Utente

 

- 53 - 

Figure 4-34 Add A New Device 

Step 2:  Enter the PIN number from the client device in the field on the above WPS screen. Then 

click Connect button. 

Step 3:  “Connect successfully” will appear on the screen of Figure 4-34, which means the client 

device has successfully connected to the router. 

Use this method if your client device asks for the router’s PIN number.   

Step 1:  On the client device, enter the PIN number listed on the router’s Wi-Fi Protected Setup 

screen, shown in Figure 4-31. 

Step 2:  The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup 

process.  

Step 3:  When the WPS LED is on, the client device has successfully connected to the router.   

)

 

1)  The WPS LED on the router will light green for five minutes if the device has been 

successfully added to the network. 

2)  The WPS function cannot be configured if the Wireless Function of the router is disabled. 

Please make sure the Wireless Function is enabled before configuring the WPS. 

Choose menu “Wireless 5GHz  → Wireless Security”, you can configure the security settings of 

your wireless network. 

There are five wireless security modes supported by the router: WPA-Personal, WPA2-Personal, 

WPA-Enterprise, WPA2-Enterprise, and WEP.