TP-Link Technologies Co. Ltd. C20I Manuale Utente

 

- 62 - 

 

¾

  Allow Guest To Access My Local Network - If enabled, guests can communicate with 

hosts.  

¾

  Allow Guest To Access My USB Storage Sharing - If enabled, guests can access to USB 

storage sharing servers. 

¾

  Guest Network Isolation -. If enabled, guests are isolated from each other. 

¾

  Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules 

will take effect.   

¾

  Band Select/Guest Network – Select the wireless network band (2.4G/5G) and enabled or 

disable its Guest Network function.   

¾

  Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be 

assigned to all wireless devices in your Guest Network.   

¾

  Max Guest number – The maximum of guests at the same time, 

¾

  Security - You can configure the security of Guest Network here.   

¾

  Access Time - During this time the wireless stations could accessing the AP.   

)

The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth 
Control on the page “Bandwidth Control->Control Settings”. 

 

Figure 4-44 The DHCP menu 

There are three submenus under the DHCP menu (shown in Figure 4-44):  DHCP Settings, 

DHCP Clients List and  Address Reservation.  Click any of them, and you will be able to 

configure the corresponding functions. 

Choose menu “DHCP  → DHCP Settings”, you can configure the DHCP Server on the page as 

shown in Figure 4-45.The router is set up by default as a DHCP (Dynamic Host Configuration 

Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to 

the router on the LAN.