TP-Link Technologies Co. Ltd. D5V2 Manuale Utente

7

Chapter 1

Get to Know About Your Modem Router

 

USB

On

The USB device is identified and ready to use.

Flashing

The USB device is being identified.

Off

No USB device is plugged into the USB port.

 

WPS

On

A wireless device has been successfully added to the network 

by WPS function.

Flashing

WPS handshaking is in process and will continue for about 2 

minutes. Please press the WPS button on other wireless devices 

that you want to add to the network while the LED is flashing.

Off

A wireless device has failed to be added to the network by WPS 

function.

 

1.  If the ADSL LED is off, please check your Internet connection first. Refer to Connect Your Modem Router for more 

information about how to make Internet connection correctly. If you have already made a right connection, 
please contact your ISP to make sure your Internet service is available now.

2.  If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off, please refer to 

. If your 

ADSL LED is ON, please check your Internet configuration. You may need to check this part of information with 
your ISP and make sure everything have been input correctly. 

The modem router’s back panel shows the antennas, connection ports and buttons. 
Refer to the following for detailed instructions.

Antennas

Used for wireless operation and data transmit. Upright them for the best Wi-Fi 

performance.

ADSL

For connecting the modem router to the Internet. Connect the port to the 

splitter or directly connect the port to the phone jack via a phone cable. For 

details, please refer to Connect the Modem Router.