TP-Link Technologies Co. Ltd. TDW8961NDV3 Manuale Utente

 

 

58

Choose “Access Management→SNMP”, you can see the SNMP screen. The Simple Network 

Management Protocol (SNMP) is used for exchanging information between network devices. 

 

Figure 4-43 

¾  Get Community: Set the password for the incoming Get and Get next requests from the 

management station. 

¾  Set Community: Set the password for incoming Set requests from the management station. 

Choose “Access Management

→UPnP”, you can configure the UPnP in the screen (shown in 

Figure 4-44). 

UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for 

simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join 

a network, obtain an IP address, convey its capabilities and learn about other devices on the 

network. In turn, a device can leave a network smoothly and automatically when it is no longer in 

use. UPnP broadcasts are only allowed on the LAN. 

 

Figure 4-44 

¾  UPnP: Activate or Deactivate the UPnP function. Only when the function is activated, can the 

UPnP take effect.