TP-Link Technologies Co. Ltd. TDW8968V1 Manuale Utente

 

67 

¾

  Add New: Click the Add New button to add a new rule entry. 

¾

  Enable Selected: Click the Enable Selected button to enable the selected rules in the list. 

¾

  Disable Selected: Click the Disable Selected button to disable the selected rules in the list. 

¾

  Delete Selected: Click the Delete Selected button to delete the selected entries in the table. 

1. Click 

the 

Add New button and the next screen will pop up as shown in Figure 4-56. 

2.  Give a name (e.g. Rule_1) for the rule in the Description field. 
3.  Select a host from the LAN Host drop-down list or choose “Add LAN Host”. 
4.  Select a target from the WAN Host drop-sown list or choose “Add WAN Host”. 
5.  Select a schedule from the Schedule drop-down list or choose “Add Schedule”. 
6. In 

the 

Action field, select Deny or Allow to deny or allow your entry. 

7. In 

the 

Status field, select Enabled or Disabled to enable or disable your entry. 

8. In 

the 

Direction field, select IN or OUT from the drop-down list for the direction. 

9. In 

the 

Protocol field, here are four options, All, TCP, UDP, and ICMP. Select one of them 

from the drop-down list for the target. 

10. Click the Save button. 

 

Figure 4-56   

Choose menu “Firewall”  →  “LAN Host”, and then you can view and set a Host list in the screen 
as shown in Figure 4-57.  

 

Figure 4-57