TP-Link Technologies Co. Ltd. TDW8980V1 Manuale Utente

 

33 

•  End IP Address: Enter a value for the DHCP server to end with when issuing IP 

addresses. The End IP Address must be smaller than 192.168.1.254. The default End IP 
Address is 192.168.1.254. 

•  Leased Time: The Leased Time is the amount of time in which a network user will be 

allowed connection to the modem router with their current dynamic IP address. Enter the 
amount of time, in hours, then the user will be “leased” this dynamic IP address. After the 
dynamic IP address has expired, the user will be automatically assigned a new dynamic IP 
address. The default is 1440 minutes. 

The detailed configuration about DHCP server, please refer to section 

. 

Choose menu “Network”Æ“IPv6 LAN Settings”, you can configure LAN IPv6 interface for your 
modem router. 

 

Figure 4-14 

¾

  Address Autoconfiguration Type: Select a type to assign IPv6 addresses to the computers 

in your LAN. RADVD and DHCPv6 Server are provided. 

1)  If RADVD is selected, it doesn’t need to be configured. 

2)  If DHCPv6 Server is selected, please complete the following parameters. 

 

Figure 4-15 

• 

Start IPv6 Address: Enter a value for the DHCPv6 server to start with when issuing IPv6 
addresses. 

• 

End IPv6 Address: Enter a value for the DHCPv6 server to end with when issuing IPv6 
addresses. 

• 

Leased Time: The Leased Time is the amount of time in which a network user will be 
allowed connection to the modem router with their current dynamic IPv6 address. Enter