TP-Link Technologies Co. Ltd. TDW8980V1 Manuale Utente

 

58 

Use this method if your client device asks for the modem router’s PIN number.   

Step 1:  On the client device, enter the PIN number listed on the modem router’s Wi-Fi Protected 

Setup screen. (It is also labeled on the bottom of the modem router.) 

Step 2:  The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup 

process.  

Step 3:  When the WPS LED is on, the client device has successfully connected to the modem 

router.  

Step 4:  Refer back to your client device or its documentation for further instructions.   

)

 

1)  The WPS LED on the modem router will light green for five minutes if the device has been 

successfully added to the network. 

2)  The WPS function cannot be configured if the Wireless Function of the modem router is 

disabled. Please make sure the Wireless Function is enabled before configuring the WPS. 

Choose menu “Wireless 5GHz”Æ” Wireless Security”, you can configure the security settings of 
your wireless network. 

There are three wireless security modes supported by the modem router: WPA/WPA2 – Personal, 
WPA/WPA2 – Enterprise, WEP (Wired Equivalent Privacy). 

 

Figure 4-44