TP-Link Technologies Co. Ltd. TDW8980V1 Manuale Utente

 

59 

¾

  Disable Wireless Security: If you do not want to use wireless security, check this radio 

button. But it’s strongly recommended to choose one of the following modes to enable 
security. 

¾

  WPA/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared 

passphrase. The modem router is configured by this security type by default. 

• 

Authentication Type: You can choose the type for the WPA/WPA2-Personal security on 
the drop-down list. The default setting is Auto, which can select WPA-PSK

 

or WPA2-PSK 

authentication type automatically based on the wireless station's capability and request. 

• 

Encryption: You can select Auto, TKIP or AES as Encryption. 

• 

Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to 
64 Hexadecimal characters. The default password is the same with the default PIN code, 
which is labeled on the bottom of the Router or can be found in Figure 4-32. 

• 

Group Key Update Period: Specify the group key update interval in seconds. The value 
should be 30 or above. Enter 0 to disable the update.

 

¾

  WPA/WPA2 – Enterprise: It’s based on Radius Server. 

 

• 

Authentication Type:  Authentication Type: You can choose the type for the 
WPA/WPA2-Personal security on the drop-down list. The default setting is Auto, which can 
select WPA-PSK

 

or WPA2-PSK authentication type automatically based on the wireless 

station's capability and request. 

• 

Encryption: You can select Auto, TKIP or AES as Encryption. 

• 

RADIUS Server IP: Enter the IP address of the Radius Server. 

• 

RADIUS Server Port: Enter the port that radius service used. 

• 

RADIUS Server Password: Enter the password for the Radius Server. 

• 

Group Key Update Period: Specify the group key update interval in seconds. The value 
should be 30 or above. Enter 0 to disable the update. 

¾

  WEP: It is based on the IEEE 802.11 standard.