TP-Link Technologies Co. Ltd. WN323G Manuale Utente

 

 
 

13

1) Select different authentications and data encryptions, the security configuration is 

different. 

2) When you select channel manually, the available network authentication are Open 

System, Shared key and WPA-None. 

3)  The RTWCU does not support WPA 802.1x authentication in Windows Vista, while the 

Windows Zero Config Tools may satisfy your need.   

• 

ASCII - Select this option, you can enter any ASCII characters to compose the 
password. 

• 

PASSPHRASE - Select this option, you can enter the characters from 0~9 to compose 
the password. 

• 

Key Index - Select the index of the password. 

• 

Network Key & Confirm network key - The fields configure the network key. The two 
should be the same. 

¾

  802.1x configure - This configures the 802.1x security, it is available when you select the 

data encryption as WPA 802.1X, WPA2 802.1X or WEP 802.1X. 
• 

EAP TYPE - Select the EAP type for the 802.1x configuration, the options are: GTC, TLS, 
LEAP, TTLS, PEAP. 

• 

Tunnel - Select the tunnel: MD5, GTC, TLS, MSCHAP-V2. The option is necessary for 
the EAP type of TTLS and PEAP. 

• 

Username - Enter the username for authentication. The option is necessary for the EAP 
type of TTLS and PEAP. 

• 

Identity - Enter the identity for the authentication.   

• 

Password - Enter the password for the authentication. The option is necessary for the 
EAP type of LEAP, TTLS and PEAP. 

• 

Certificate - Select the certificate you apply. 

When you select the Open System as the authentication, the Disabled and WEP can be available 

for the data encryption. If you select Disabled, you don’t need to configure any passwords. If you 

select WEP, you can configure the password as follows. 

For example: If the wireless network takes Open System authentication, WEP data encryption, 

the password is 64bit with the value of 0123456789. The index is 1.