TP-Link Technologies Co. Ltd. WN323G Manuale Utente

 

 
 

14

 

Figure 3-7 

Step 1:  Select the “Open System” as the Network Authentication. 

Step 2:  Select the “WEP” as Data encryption. 

Step 3:  Select the type for the password, you can select the ASCII or PASSPHRASE. For ASCII, 

you can enter any characters in the keyboard; For PASSPHRASE, you can enter the 

characters from 0 to 9. 

Step 4:  Select “64 Bits” as the Key Length, then enter “0123456789” as the password value. 

Step 5:  Select the Key index “1”, and click the OK to save the configuration. 

authentication 

When you select the Shared Key as the authentication, the only available data encryption is 

WEP. 

)

The configuration for Shared Key authentication and Open System are similar, you can refer to 
the Open System authentication to configure it. 

authentication 

When you select the WPA-PSK as the authentication, the available data encryptions are TKIP 

and AES. Please select the one according your need. 

For example: If the wireless network takes WPA-PSK authentication, TKIP data encryption, the 

network key is 0123456789. You can configure it for adapter as follows.