TP-Link Technologies Co. Ltd. WR1043NDV2 Manuale Utente

 

¾

 

Connect Automatically - Connect automatically after the router is disconnected. To use this 

option, click the radio button. 

¾

 

Connect Manually - You can configure the router to make it connect or disconnect manually. 

After a specified period of inactivity (Max Idle Time), the router will disconnect from your 

Internet connection, and you will not be able to re-establish your connection automatically as 

soon as you attempt to access the Internet again. To use this option, click the radio button. If 

you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time 

field. Otherwise, enter the number in minutes that you wish to have the Internet connecting 

last unless a new link is requested. 

Caution: Sometimes the connection cannot be disconnected although you specify a time to 

Max Idle Time, since some applications are visiting the Internet continually in the background. 

)

If you don't know how to choose the appropriate connection type, click the Detect button to allow 

the router to automatically search your Internet connection for servers and protocols. The 

connection type will be reported when an active Internet service is successfully detected by the 

router. This report is for your reference only. To make sure the connection type your ISP provides, 

please refer to the ISP. The various types of Internet connections that the router can detect are as 

follows: 

z

 

PPPoE - Connections which use PPPoE that requires a user name and password.   

z

 

Dynamic IP - Connections which use dynamic IP address assignment.   

z

 

Static IP - Connections which use static IP address assignment. 

The router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses one 
of these protocols, then you must configure your connection manually. 

Choose menu “Network→LAN”, and then you can configure the IP parameters of the LAN on the 
screen as below. 

-31-