TP-Link Technologies Co. Ltd. WR1043NDV2 Manuale Utente

 

 

Figure 4-14  LAN 

¾

 

MAC Address - The physical address of the router, as seen from the LAN. The value can't 

be changed. 

¾

 

IP Address - Enter the IP address of your router or reset it in dotted-decimal notation 

(factory default: 192.168.0.1). 

¾

 

Subnet Mask - An address code that determines the size of the network. Normally use 

255.255.255.0 as the subnet mask.   

¾

 

IGMP Proxy - The Internet Group Management Protocol (IGMP) feature allows your devices 

in LAN to watch TV.   

)

 

1.  If you change the IP Address of LAN, you must use the new IP Address to login the router.   
2.  If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the 

DHCP server will change accordingly at the same time，while the Virtual Server and DMZ 
Host will not take effect until they are re-configured. 

3.  You can enable or disable IGMP Proxy. This feature is enabled by default. 

Choose menu “Network→MAC Clone”, and then you can configure the MAC address of the 

WAN on the screen below, Figure 4-15: 

 

Figure 4-15  MAC Address Clone

 

Some ISPs require that you register the MAC Address of your adapter. Changes are rarely 

needed here. 

-32-