TP-Link Technologies Co. Ltd. WR1043NDV2 Manuale Utente

 

 

Figure 4-58 Local Management 

By default, the radio button “All the PCs on the LAN are allowed to access the Router's 

Web-Based Utility” is checked. If you want to allow PCs with specific MAC Addresses to access 

the Setup page of the Router's Web-Based Utility locally from inside the network, check the radio 

button “Only the PCs listed can browse the built-in web pages to perform Administrator 

tasks”, and then enter each MAC Address in a separate field. The format for the MAC Address is 

XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with MAC address listed can 

use the password to browse the built-in web pages to perform Administrator tasks while all the 

others will be blocked.   

After click the Add button, your PC's MAC Address will be placed in the list above. 

Click the Save button to save your settings.   

)

If your PC is blocked but you want to access the router again, use a pin to press and hold the 

Reset Button (hole) on the back panel for about 5 seconds to reset the router’s factory defaults 

on the Router’s Web-Based Utility. 

Choose menu “Security  → Remote Management”, and then you can configure the Remote 

Management function in the screen as shown in Figure 4-59. This feature allows you to manage 

your router from a remote location via the Internet. 

-67-