TP-Link Technologies Co. Ltd. WR1043NDV2 Manuale Utente

 

¾

  Rule - In this field, create a name for the rule. Note that this name should be unique (e.g. 

Rule_1).  

¾

  Host - In this field, select a host from the drop-down list for the rule. The default value is 

the Host Description you set just now. 

¾

  Target - In this filed, select a target from the drop-down list for the rule. The default value 

is the Target Description you set just now. 

¾

  Schedule - In this field, select a schedule from the drop-down list for the rule. The 

default value is the Schedule Description you set just now. 

¾

  Status - In this field, there are two options, Enable or Disable. Select Enable so that the 

rule will take effect. Select Disable so that the rule won't take effect.   

5. Click 

Finish to complete adding a new rule. 

1. Click 

the 

Add New… button and the next screen will pop up as shown in Figure 4-69. 

2.  Give a name (e.g. Rule_1) for the rule in the Rule Name field. 

3.  Select a host from the Host drop-down list or choose “Click Here To Add New Host List”. 

4.  Select a target from the Target drop-sown list or choose “Click Here To Add New Target 

List”. 

5.  Select a schedule from the Schedule  drop-down list or choose “Click Here To Add New 

Schedule”. 

6. In 

the 

Status field, select Enabled or Disabled to enable or disable your entry. 

7. Click 

the 

Save button. 

 

Figure 4-69    Add Internet Access Control Entry 

For example: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access 

www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the 

LAN to access the Internet, you should follow the settings below:   

-76-