TP-Link Technologies Co. Ltd. WR64XGV0 Manuale Utente

 

 13

 

Figure 4-8    Quick Setup - Static IP 

) 

The IP parameters should have been provided by your ISP. 

¾

  IP Address: This is the WAN IP address as seen by external users on the Internet (including 

your ISP). Enter the IP address into the field. 

¾

  Subnet Mask: The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0 

¾

  Default Gateway: Enter the gateway IP address into the box if required. 

¾

  Primary

 

Enter the DNS Server IP address into the boxes if required. 

¾

  Secondary DNS: If your ISP provides another DNS server, enter it into this field. 

After you complete the above, click Next, the Wireless settings page will appear, shown in Figure 

4-9. 

 

Figure 4-9    Quick Setup - Wireless settings 

In this page, you can configure the following wireless parameters: 

¾

  Wireless  Radio:  Indicates whether the Access Point feature of the router is enabled or 

disabled. If disabled, the WLAN LED on the front panel will not be lit and the wireless 

stations will not be able to access the router. If enabled, the WLAN LED will be lit up and 

wireless stations will be able to access the router. 

¾

  SSID: Enter a value of up to 32 characters. The same SSID must be assigned to all wireless 

devices on your network. The default SSID is TP-LINK. This value is case-sensitive. For