TP-Link Technologies Co. Ltd. WR64XGV0 Manuale Utente

 

 14

example, TP-LINK is NOT the same as tp-link. 

¾

  Region: Select your region from the pull-down list. This field specifies the region where the 

wireless function of the router can be used. It may be illegal to use the wireless function of the 

router in a region other than one of those specified in this field. 

¾

  Channel: The current channel in use. This field determines which operating frequency will 

be used. 

¾

  Mode: Indicates the current mode (108Mbps (Dynamic), 108Mbps (Static), 54Mbps 

,  11Mbps (802.11b)). If you select 108Mbps (Dynamic), it is compatible with 

and 11Mbps (802.11b). If you select 54Mbps (802.11g), it is compatible 

with 11Mbps (802.11b). 

These settings are only for basic wireless parameters, for advanced settings, please refer to 

Section 5.5: "Wireless."

   

) 

The change of wireless settings won't take effect until the router reboots! You can reboot it 

manually. If you need instructions as to how to do this, please refer to 

Section 5.11.5: "Rebooting 

the Router"

 

Click the Next button. You will then see the Finish page (shown in Figure 4-10): 

 

Figure 4-10 Quick Setup - Finish 

After finishing all configurations of basic network parameters, please click Finish button to exit 

this Quick Setup.