TP-Link Technologies Co. Ltd. WR64XGV0 Manuale Utente

Pagina di 82
MR4-WR642G
108M Wireless Router User Guide 
 
 26
¾
  Dynamic IP/ Static IP – Choose either as you are given by your ISP. 
Click the Connect button to connect immediately. Click the Disconnect button to disconnect 
immediately. 
¾
  Connect on Demand - You can configure the router to disconnect from your Internet 
connection after a specified period of inactivity (Max Idle Time). If your Internet connection 
has been terminated due to inactivity, Connect on Demand enables the router to 
automatically re-establish your connection as soon as you attempt to access the Internet 
again. If you wish to activate Connect on Demand, click the radio button. If you want your 
Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, 
enter the number of minutes you want to have elapsed before your Internet connection 
terminates. 
Caution
: Sometimes the connection cannot be disconnected although you specify a time to 
Max Idle Time, since some applications is visiting the Internet continually in the background. 
¾
  Connect Automatically - Connect automatically after the router is disconnected. To use this 
option, click the radio button. 
¾
  Connect Manually - You can configure the router to make it connect or disconnect manually. 
After a specified period of inactivity (Max Idle Time), the router will disconnect from your 
Internet connection, and you will not be able to re-establish your connection automatically as 
soon as you attempt to access the Internet again. To use this option, click the radio button. If 
you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time 
field. Otherwise, enter the number in minutes that you wish to have the Internet connecting 
last unless a new link is requested. 
Caution
: Sometimes the connection cannot be disconnected although you specify a time to 
Max Idle Time, since some applications is visiting the Internet continually in the background. 
8.  If you choose PPTP, you should enter the following parameters (Figure 5-12):