TP-Link Technologies Co. Ltd. WR64XGV0 Manuale Utente

 

 28

enter the number of minutes you want to have elapsed before your Internet connection 

terminates. 

: Sometimes the connection cannot be disconnected although you specify a time to 

Max Idle Time, since some applications are visiting the Internet continually in the 

background. 

¾

  Connect Automatically - Connect automatically after the router is disconnected. To use this 

option, click the radio button. 

¾

  Connect Manually - You can configure the router to make it connect or disconnect manually. 

After a specified period of inactivity (Max Idle Time), the router will disconnect from your 

Internet connection, and you will not be able to re-establish your connection automatically as 

soon as you attempt to access the Internet again. To use this option, click the radio button. If 

you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time 

field. Otherwise, enter the number in minutes that you wish to have the Internet connecting 

last unless a new link is requested. 

: Sometimes the connection cannot be disconnected although you specify a time to 

Max Idle Time, since some applications are visiting the Internet continually in the background. 

You can configure the MAC address of the WAN port on this page, Figure 5-13: 

 

Figure 5-13  MAC Address Clone 

Some ISPs require that you register the MAC Address of your adapter, which is connected to your 

cable/DSL Modem or Ethernet during installation. Changes are rarely needed here. 

 This field displays the current MAC address of the WAN port, which is used 

for the WAN port. If your ISP requires that you register the MAC address, please enter the correct 

MAC address into this field. The format for the MAC Address is XX-XX-XX-XX-XX-XX (X is any 

hexadecimal digit).   

¾

  Your PC's MAC Address - This field displays the MAC address of the PC that is managing 

the router. If the MAC address is required, you can click the Clone MAC Address button 

and this MAC address will fill in the WAN MAC Address field.