TP-Link Technologies Co. Ltd. WR64XGV0 Manuale Utente

 

 32

address 00-E0-4C-00-07-BE in the MAC of AP field and configure the remote AP's bridge 

options. 

¾

  Enable Wireless Security – The wireless security function can be enabled or disabled. If 

disabled, the wireless stations will be able to connect the router without encryption. It is 

recommended strongly that you choose this option to encrypt your wireless network. The 

encryption settings are described below. 

¾

  Authentication Type - You can select one of the following authentication types: 

• 

 Select WEP authentication type based on 802.11 authentications. 

• 

 - Select WPA/WPA2 authentication type based on pre-shared 

passphrase.  

• 

 Select WPA/WPA2 authentication type based on Radius Server. 

¾

  Authentication Options - You can select one of the following authentication options:   

• 

When you select WEP for authentication type you can select the following 

authentication options: 

• 

Select Shared Key or Open System authentication type automatically 

based on the wireless station request. 

• 

Select 802.11 Shared Key authentication. 

• 

Select 802.11 Open System authentication. 

• 

When you select WPA-PSK/WPA2-PSK for authentication type you can select 

, WPA –PSK or WPA2-PSK as authentication options. 

• 

When you select WPA/WPA2 as an authentication type you can select Automatic 

 or WPA2 as authentication option. 

¾

  WEP Key Format - You can select ASCII  or  Hexadecimal  format. ASCII Code Format 

stands for any combination of keyboard characters in the specified length. Hexadecimal 

format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified 

length. 

¾

  WEP Key settings - Select which of the four keys will be used and enter the matching WEP 

key information for your network in the selected key radio button. These values must be 

identical on all wireless stations in your network. 

¾

  Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit) for encryption. 

"Disabled" means the WEP key entry is invalid. 

• 

For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, 

A-F, zero key is not permitted) or 5 ASCII characters.   

• 

For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9, 

a-f, A-F, zero key is not permitted) or 13 ASCII characters. 

• 

For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 0-9, 

a-f, A-F, zero key is not permitted) or 16 ASCII characters. 

¾

  Encryption - When you select WPA-PSK/WPA2-PSK or WPA/WPA2 for Authentication 

you can select Automatic, TKIP or AES as Encryptions.