TP-Link Technologies Co. Ltd. WR64XGV0 Manuale Utente

 

 51

1.  Enter the appropriate MAC Address into the MAC Address field. The format of the MAC 

Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 

00-0E-AE-B0-00-0B. 

2.  Type the description of the PC in the Description field. Fox example: John’s PC. 

3.  Status - Select Enabled or Disabled for this entry on the Status pull-down list. 

4. Click 

the 

 button to save this entry. 

To add additional entries, repeat steps 1-4. 

When finished, click the Return button to return to the MAC Address Filtering page.  

To modify or delete an existing entry: 

1. Click 

the 

in the entry you want to modify. If you want to delete the entry, click the 

. 

2.  Modify the information. 

3. Click 

the 

 button. 

Click the Enable All button to make all entries enabled. 

Click the Disabled All button to make all entries disabled. 

Click the Delete All button to delete all entries 

Click the Next button to go to the next page and click the Previous button to return to the 

previous page. 

If you want to block the PC with MAC addresses 00-0A-EB-00-07-BE and 

00-0A-EB-00-07-5F to access the Internet, first, enable the Firewall and MAC Address Filtering 

on the Firewall page, then, you should specify the Default MAC Address Filtering Rule "Deny 

" on the Firewall page and the following 

MAC address filtering list on this page:

 

 

You can configure the Remote Management function on this page shown in Figure 5-39. This 

feature allows you to manage your Router from a remote location, via the Internet. 

 

Figure 5-39  Remote Management