TP-Link Technologies Co. Ltd. WR64XGV0 Manuale Utente

 

 53

¾

  Packets Statistic interval (5 ~ 60) - The default value is 10. Select a value between 5 and 

60 seconds in the pull-down list. The Packets Statistic interval value indicates the time 

section of the packets statistic. The result of the statistic used for analysis by SYN Flood, 

 and ICMP-Flood. 

¾

  DoS protection - Enable or Disable the DoS protection function. Only when it is enabled, 

will the flood filters be effective. 

¾

  Enable ICMP-FLOOD Attack Filtering -  Enable or Disable the ICMP-FLOOD Attack 

Filtering. 

¾

  ICMP-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value 

between 5 ~ 3600 packets. When the current ICMP-FLOOD Packets numbers is beyond the 

set value, the router will start up the blocking function immediately. 

¾

  Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.   

¾

  UDP-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value 

between 5 ~ 3600 packets. When the current UPD-FLOOD Packets numbers is beyond the 

set value, the router will start up the blocking function immediately. 

¾

  Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN- FLOOD 

Attack Filtering. 

¾

  TCP-SYN-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value 

between 5 ~ 3600 packets. When the current TCP-SYN-FLOOD Packets numbers is 

beyond the set value, the router will start up the blocking function immediately. 

¾

  Ignore Ping Packet from WAN Port - Enable or Disable ignore ping packet from WAN port. 

The default is disabled. If enabled, the ping packet from the Internet cannot access the 

router. 

¾

  Forbid Ping Packet from LAN Port - Enable or Disable forbidding Ping Packet to access 

the router from the LAN port. The default value is disabled. If enabled, the ping packet from 

the LAN port cannot access the router. (Defends against some viruses) 

Click the Save button to save the settings. 

Click the Blocked DoS Host Table button to display the DoS host table by blocking. The page 

will appear that shown in Figure 5-41: 

 

Figure 5-41    Thwarted DoS Host Table 

This page shows Host IP Address and Host MAC Address for each host blocked by the router.