TP-Link Technologies Co. Ltd. WR841NV13 Manuale Utente
51
Chapter 4
Configure
3. Select
Enabled
or
Disabled
for this entry on the
Status
drop-down list.
4. Click
Save.
You can also do the following operations to modify the current settings.
• Click
• Click
Delete
to delete the entry.
• Click
Enable All
to enable all the entries.
• Click
Disable All
to disable all the entries.
• Click
Delete All
to delete all the entries.
• Click
Previous
to view the information on the previous screen and
Next
to view the
information on the next screen.
4. 11. 2. System Routing Table
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for
the router.
2. Go to
Advanced Routing
>
System Routing Table
, and you can view all the valid
route entries in use.
•
Destination Network
- The Destination Network is the address of the network or host
to which the static route is assigned.
•
Subnet Mask
- The Subnet Mask determines which portion of an IP address is the
network portion, and which portion is the host portion.
•
Gateway
- This is the IP address of the gateway device that allows for contact between
the Router and the network or host.
•
Interface
- This interface tells you whether the Destination IP Address is on the LAN &
WLAN (internal wired and wireless networks), or the WAN (Internet).
• Click
Refresh
to refresh the data displayed.
4. 12. Bandwidth Control
4. 12. 1. Control Settings
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for
the router.