TP-Link Technologies Co. Ltd. WR841NV13 Manuale Utente
52
Chapter 4
Configure
2. Go to
Bandwidth Control
>
Control Settings
.
3. Configure the bandwidth as needed and click
Save
.
The values you configure for the Egress Bandwidth and Ingress Bandwidth should be
less than 100,000Kbps. For optimal control of the bandwidth, please select the right
Line Type and consult your ISP for the total egress and ingress bandwidth.
•
•
Enable Bandwidth Control
- Check this box so that the Bandwidth Control settings
can take effect.
•
Line Type
- Select the right type for you network connection. If you are not sure,
please consult your ISP.
•
Egress Bandwidth
- The upload speed through the WAN port.
•
Ingress Bandwidth
- The download speed through the WAN port.
4. 12. 2. Rules List
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for
the router.
2. Go to
Bandwidth Control
>
Rules List
, and you can view and configure the Bandwidth
Control rules.
•
Description
- This is the information about the rules such as address range.
•
Egress Bandwidth
- This field displays the max and min upload bandwidth through
the WAN port. The default is 0.
•
Ingress Bandwidth
- This field displays the max and min download bandwidth through
the WAN port. The default is 0.
•
Enable
- This field displays the status of the rule.
•
Modify
- Click
Modify/Delete
to edit/delete the rule.