IDS GeoRadar Srl SRS-FW400 Manuale Utente
IDS Ingegneria Dei Sistemi S.p.A.
Protocol: MN/2009/030 - Rev. 1.2
Safe Rail System Data Acquisition Software
70
/
76
Fig. C. 5 - Com settings window
For examp le, selectin g External device typ e RS-232 GPS :
Select 1 in the
Com menu (or set the number of the COM p ort
number the GPS is connected to) and the other p arameters accordin g
to the GPS characteristics;
to the GPS characteristics;
Use the
Refresh rate field in Fig. C. 3 to select the numb er of
sweep s interval the GPS data will be acquir ed with; for examp le, if
y ou have set the
y ou have set the
Acquisition S tep to 2.4cm and the Refresh rate
field to 20, the sy stem will acquire GPS data every 48cm (2.4cm
*20=48cm); if the
*20=48cm); if the
Refresh rate = 1, the SRS_PLUS sy stem will
uptake all the information p roduced by the GPS accordin g to the
time p arameters set on GPS equip ment.
time p arameters set on GPS equip ment.
S tep 5 Accep t the p arameters set in the COM settings field by click in g the OK
button, as shown Fig. C. 5.
S tep 6 Correct functioning of the GPS and its communication with the
SRS_PLU S sy stem is indicated by the GPS
spy light in the acquisition
window; when the light is green, the GPS is corr ectly connected and
functioning; when the GPS is red, either the connection between the GPS
and SRS_PLU S sy stems has not been correctly made or the GPS is
switched off (see p icture Fig. C. 6).
functioning; when the GPS is red, either the connection between the GPS
and SRS_PLU S sy stems has not been correctly made or the GPS is
switched off (see p icture Fig. C. 6).
Fig. C. 6 - GPS spy
GPS spy light