ALLREMOTE Wireless Technology Co. Ltd. RRC065A Manuale Utente

1.)  Get Ready Into Duplication Mode – to write code into remote:   

Please turn the “SW” to “DN” position, the red LED will be flashing continuously. 

     

               

            FIG.1                                                                                                                                                                           

2-1. Please be sure RRC065A had turned into Duplication Mode (step 1)   

Placing the RRC065A at the right position near the original remote control (different 

brands required to be in different position, please refer to the illustration) 

Press and hold the Original remote (FIG.2 & FIG.2-1)                                                                                           

           

                 

 

                      FIG.2                                                    FIG.2-1 

Then choose one of the two silver square buttons to press and hold on RRC065A,   

(*please make sure that both Original remote and RRC065A buttons are both being 

pressed and hold) 

The blue LED will be flashing once and then turn into red. – code writing success   

Release the buttons from both remotes, the red LED will be flashing and we finished 

the duplication. 

3.)  Quit Duplication Mode   

 

FIG.3 

Allremote Wireless Technology, 2008/4/7 

1