RadioFrame Networks Inc MCSERIES10 Manuale Utente
MC-Series System Installation & Testing
Installation
RadioFrame Networks, Inc.
43
4.6.6 Power
Warning!
Verify that all breakers in the PDU are in the OFF position prior to proceeding.
Leave them in the OFF position until instructed otherwise.
Leave them in the OFF position until instructed otherwise.
1
Connect the powerplant to the PDU using two lugs (lug family name). Crimp tool needed:
CT-1700.
CT-1700.
4.7 Intra-cabinet
Cabling
All intra-cabinet cabling will be complete prior to shipment. The standard shipped configuration is
3-sector without diversity. If the required intra-cabinet cabling configuration differs from the
shipped configuration, for example from 3-sector to omni or 2-sector configurations, refer to
section 8.3 Adding a Sector and section 8.4 Removing a Sector for procedures on how to re-wire
the MC-Series System cabinet.
3-sector without diversity. If the required intra-cabinet cabling configuration differs from the
shipped configuration, for example from 3-sector to omni or 2-sector configurations, refer to
section 8.3 Adding a Sector and section 8.4 Removing a Sector for procedures on how to re-wire
the MC-Series System cabinet.