Honeywell International Inc. WFSLCDUI Manuale Utente
16
PRELIMINARY: Firelite Wireless Sensor Network P/N LS10036-000FL-E:N0 10/10/2013
W-GATE
Mounting & Wiring
2.5.2 Wiring
•
All wiring must be installed in compliance with the National Electrical Code and the local
codes having jurisdiction.
codes having jurisdiction.
•
12-18 AWG is recommended.
Figure 2.4 (Wiring diagram with terminal descriptions)
For wiring connections, follow this procedure:
•
Strip about 3/8” of insulation from the end of the wire.
•
Then, to make the wire connection, slide the bare end of the wire under the appropriate
clamping plate, and tighten the clamping plate screw.
clamping plate, and tighten the clamping plate screw.
NOTE: Do not loop the wire under the clamping plate.