Honeywell International Inc. WFSLCDUI Manuale Utente
32
PRELIMINARY: Firelite Wireless Sensor Network P/N LS10036-000FL-E:N0 10/10/2013
W-GATE
Operations
2.7.5 Weak Link Trouble Reporting
The Firelite Wireless Sensor Network uses two paths of communication for each device. To estab-
lish the link between devices as a viable communication path, the signal strengths must meet the
limits provided in 2.3, "Specifications". The Wireless Sensor Network implements a higher thresh-
old for primary connections to provide an extra layer of robustness and immunity from interfer-
ence. A weak link trouble condition is initiated for any device that does not have at least one
connection at the primary threshold. This is an optional setting that can be disabled to ignore the
weak link trouble condition. The trouble can be disabled at the W-GATE.
lish the link between devices as a viable communication path, the signal strengths must meet the
limits provided in 2.3, "Specifications". The Wireless Sensor Network implements a higher thresh-
old for primary connections to provide an extra layer of robustness and immunity from interfer-
ence. A weak link trouble condition is initiated for any device that does not have at least one
connection at the primary threshold. This is an optional setting that can be disabled to ignore the
weak link trouble condition. The trouble can be disabled at the W-GATE.
Disabling Trouble Reporting at the W-GATE Using PC Tools
To disable trouble reporting at the W-GATE through PC tools, perform the following steps:
1.
Connect the W-USB dongle device to your computer. For more information on USB dongle,
refer to Section 5:, "USB Adapter".
refer to Section 5:, "USB Adapter".
2.
Launch the PC tools application. Refer to Appendix B:, "PC tools" to know about launching
the PC tools application.
the PC tools application.
3.
Go to Diagnostics step.
4.
Choose the W-GATE from the communicator pane.
5.
Click View Mesh.
6.
Click Advanced Functions. A drop-down list is displayed.
7.
Click Weak links troubles (On). The Report weak links troubles screen is displayed.
8.
Click Turn off reporting.
The trouble reporting is disabled.