Honeywell International Inc. WFSLCDUI Manuale Utente
PRELIMINARY: Firelite Wireless Sensor Network P/N LS10036-000FL-E:N0 10/10/2013
33
Operations
W-GATE
2.7.6 Collapse Network Command
The collapse command is a diagnostic function to break the mesh network. All devices will retain
the profile information but will be removed from the mesh. The mesh can be immediately reformed
by activating mesh formation.
the profile information but will be removed from the mesh. The mesh can be immediately reformed
by activating mesh formation.
CAUTION:
FIRE PROTECTION FROM WIRELESS DEVICES WILL BE LOST WHEN A
COLLAPSE COMMAND IS ISSUED.
The mesh network can be collapsed using the PC-based configuration tool.
Collapsing Mesh Network Using PC Tools
To collapse the mesh network using the PC based configuration tool, perform the following steps:
1.
Connect the W-USB dongle device to your computer. For more information on USB dongle,
refer to Section 5:, "USB Adapter".
refer to Section 5:, "USB Adapter".
2.
Launch the PC tools application. Refer to Appendix B:, "PC tools" to know about launching
the PC tools application.
the PC tools application.
3.
Go to Diagnostics step.
4.
Select a Gateway from the communicator pane.
5.
Click View Mesh. The mesh is displayed.
6.
Click Advanced Functions
on top of the mesh display. A drop down
list is displayed.
7.
Click Collapse Mesh. The Collapse mesh network screen is displayed.
8.
Click Yes. The network is collapsed and a confirmation is displayed as shown below.