C. D. V. I. F0101000019 Manuale Utente
Edition 01/2001
G0301GB0089V01
- 1 -
WIRING DIAGRAM AND INSTRUCTIONS
UCA/3
3-DOOR CONTROL UNIT
WITH BUILT-IN RF RECEIVER
Wave
λ
/4 17,3 cm receive
antenna or antenna at 50
Ω
Wiring diagrams at the end of the user manual
This device comes with a varistor.
The varistor must be connected to the strike terminal
(electromagnet…) operated by the device.
If this product works with many strikes, each of them should
have a varistor.
The varistor controls the overload produced by the strike coil –
back emf.
The varistor must be connected to the strike terminal
(electromagnet…) operated by the device.
If this product works with many strikes, each of them should
have a varistor.
The varistor controls the overload produced by the strike coil –
back emf.
If you are using a « Shear Lock » electromagnetic lock, it is recommended to use a
separate power supply than the one connected to the control unit!
separate power supply than the one connected to the control unit!