WebGate Inc. IR440X-WG1U Manuale Utente

 

 

20 

 

 

It is possible to manage Cam with cable modem instead of dedicated line. 

To use Cam with cable modem, input on panel of [Ethernet] and [CRS] properly 

 

Click the  ‘DHCP Enable’. DHCP server will  automatically assign with IP Address, Network Mask and 

Gateway Address if the LAN is connected with cable modem. 

 

When a  Cam is installed under the environment of Cable Modem or  ADSL Modem connection, its IP 

address changes whenever it reconnects to the Internet Service Provider. In this case users who don’t know 
the changed IP address cannot get access to the  Cam.  

 

A  Cam with dynamic IP should be registered to the CRS server in order to make it easy for users to find the 

changed IP address, when they want to access the Cam. Please refer to ‘CRS’.   

 

To use CRS, configure the descriptions below. If you use ADSL modem or Cable modem, you should 

configure it as same ways. 

 

n  Registration Interval:  In order to maintain continuous connectivity, user should reset the 

‘Registration Interval’. Dynamic IP addresses are updated to CRS server periodically according to 

time interval. When you configure it as  ‘Disable’ or any data is not transmitted from Cam for 2 days, 

server may delete about registrations. Even though you configure‘Disable’, it would be deleted 

registrations from CRS in 2 days. 

 

n  Registration Server: IP address of CRS, which is managed by ‘WebGate Inc.’, is ‘210.116.114.37 ’ 

and URL is ‘webeye.to’. It needs not to register DNS server when entering IP address. And you 

must register DNS server when entering URL. IP address of DNS that is registered as ‘webeye.to’ 

is ‘211.53.133.11’. 

 

n  Group ID: Group ID is for  discriminating and managing the information of Cam belonging to 

group. This is to enter your own group ID. It is recommended unique group ID to avoid other group 

ID’s Cam.