WebGate Inc. IR440X-WG1U Manuale Utente

 

 

21 

 

 

It is possible to manage Cam with ADSL modem instead of dedicated line. 

To use Cam with ADSL modem, input on panel of [Ethernet], [xDSL] and [CRS] properly  

 

If IP Address, Network Mask, and Gateway Address are same with PC’s ones, you should enter different 

values at [Ethernet] panel in order to connect Cam to ADSL normally.   

 

If not, you don’t need to configure [Ethernet] panel. (For more detailed information, please refer to  “Help 

about CRS” part.) 

 
Uncheck ‘DHCP Enable’. 

 

Click the ‘xSDL’. Input user ID and password, which are assigned from the Internet Service Provider. 

 

When a  Cam is installed under the environment of Cable Modem or  ADSL Modem connection, its IP 

address changes whenever it reconnects to the Internet Service Provider. In this case users who don’t know 

the changed IP address cannot get access to the  Cam.  

 

A  Cam with dynamic IP should be registered to the CRS server in order to make it easy for users to find the 

changed IP address, when they want to access the Cam. Please refer to ‘CRS’.   

 
To use CRS, configure the descriptions below. If you use ADSL modem or Cable modem, you should 

configure it as same ways. 

 

n  Registration Interval:  In order to maintain continuous connectivity, user should reset the 

‘Registration Interval’. Dynamic IP addresses are updated to CRS server periodically at time 

interval. When configuring  ‘Disable’ or without  any data transferr ing from Cam for 2 days, server 

may delete about registrations. . Even though you configure‘Disable’, it would be deleted 
registrations from CRS in 2 days. 

 

n  Registration  Server: IP address for CRS, which is managed by ‘WebGate Inc.’, is ‘210.116.114.37 ’ 

and URL is ‘webeye.to’. It needs not to register DNS server when entering IP address. And you 

must register DNS server when entering URL. IP address of DNS that is registered as ‘webeye.to’ is 

‘211.53.133.11’. 

 

n  Group ID: Group ID is for discriminating and managing the information of Cam belonging to group. 

This is to enter your own group ID. It is recommended unique group ID to avoid other group ID’s  

Cam.