Radwin Ltd. AMWL1530 Manuale Utente
WinLink 1000 Installation and Operation Manual
Chapter 3 Configuration
Changing the Transmit Power
Each ODU can be configured to have a different transmit power level.
Î
To change the Transmit Power:
1. Click configuration from the main menu.
2. Select which site to configure.
2. Select which site to configure.
The configuration dialog box opens.
3. Click the Air Interface Tab. (See
)
4. Select the required Transmit Power Level (See Figure 3-15, below).
Figure 3-15. Changing the Transmit Power
Defining the Management Addresses
Each site must be configured separately, first site A then site B.
Î
To define the Management Addresses:
1. Click configuration from the main menu.
2. Select which site to configure.
2. Select which site to configure.
The configuration dialog box opens.
Performing Configuration of WinLink 1000
3-15