Kirisun Communications Co. Ltd. PT420801 Manuale Utente

                                                                               Page 17 of 22 

 

The dealer may set the energy saving modes of the battery by programming.   

If this function is enabled, the phone will enter the battery saving mode if not receiving any signal 

or any operation for 10 seconds. The phone will automatically quit the battery saving mode if 

receiving any signal or operation.   

There are 4 modes of battery saving: 1:1, 1:2, 1:4 and off.   

This function can reduce the power consumption of the battery.   

 

In the low battery status, the indicator will flash for prompt. If the battery level is so low as to 

reach the preset value during transmission of signals, the red indicator will flash. When the battery 

level is too low, the phone is not capable of transmitting signals   

 

This feature can be enabled or disabled by the dealer and has 2 modes: Chinese and English.   

When changing the channel with the channel selector, after the channel is changed, the phone will 

announce the number of the channel selected.   

 

The dealer may have programmed QT or DQT signals on channels of the phone, you can ignore 

calls of other irritant stations using the same channel.   

When a certain channel is provided with QT or DQT signals, the squelch is only enabled when 

receiving correct QT or DQT signals. Similarly, only stations with the QT/DQT signals 

conforming to that of your phone can receive your signal.   

Note: Although it appears that once you use QT/DQT, you can have your own channel, if other 

stations set the same QT or DQT signals, they can still hear your calling.   

 

DTMF signaling can be set into code sequence by the dealer, when the coding template contains